![]() Tighten the neck bolts to “finger tightness.” Don’t use an electric drill or screwdriver as that much force can lead to over tightening and damage the wood.That way, if the screwdriver slips out of the top of the screw, you won’t scratch the finish or dent the wood. Tip: whenever you are using a screwdriver on an instrument, put your fingers around the head of the screwdriver to hold it in place.Rest the instrument face down and use your phillips screwdriver to tighten the bolts.They come loose over time and it’s important to stability and sound that they be tight.” But it is the first thing that you should do. This is one step that everybody overlooks, including myself. Step One: tightening the neck bolts/strap buttons: “If you have a bolt-on instrument, you need to tighten the neck bolts. Allen wrenches for the bridge (and for the truss rod if you have a headstock truss rod).īasic Setup Steps and the Order in Which to Do Them.There are many options available including an Peterson strobe tuner app for your phone. To adjust intonation, it’s best to use a strobe tuner. Tuner: any tuner is fine for regular tuning.Some sort of neck support to hold the neck steady and protect the instrument and surface when the instrument is face down.Soft, level, clean work surface with a towel, mat, or any other soft layer that won’t scratch the instrument’s finish.It’s not rocket science! I’m going to go over the basic tools, and the basic order in which to approach things with the goal of you being able to maintain your basses for routine maintenance.” I’ve always felt that bass players should be able to do basic maintenance on their own instruments. “I’d like to take this opportunity to share with you my approach to setting up a bass.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |